[orbit-user] Problem with loading Image

[Aaron Fernandes]

Yes we are turning that on. omf stat shows powered on as well.

Just to give more details, we are trying to compile a new kernel  
2.6.16 and boot from it.


We took care of three important things listed on the Orbit website  
while compiling the new kernel:

     * a serial console @9600,8,n,1 on the first serial port (I am  
assuming that we only have to include the option in grubs menu.lst  
console=ttyS0,9600n8 .. after selecting the option of serial port in  
configuration of new kernel)

     * driver support for 2 Marvell gigabit network card

     * and dhcp on the 2nd wired interface (dhcp client ON by default )


Is there anything we have to do with nodehandler client or something..  
due to which it is not able to ssh. Are we missing anything on eth1.

Thanks,

Aaron


Quoting Mesut Ali Ergin <ergin at eden.rutgers.edu>:

> Aaron,
>
> Have you turned the node on (and wait about a minute) after imaging was
> completed?
>
> e.g.,
>
> omf tell on 1,1
>
> Best,
>
> --
> MAE
>
> Aaron Fernandes wrote:
>> Hi
>>
>> I am trying a load a saved image on to a node.
>>
>> The image loads correctly but when I try to ssh into the node, it
>> gives an error saying
>>
>> "ssh: connect to host node1-1 port 22: No route to host"
>>
>> Am I missing something when saving the image. Please help.
>>
>> Thanks.
>>
>> -Aaron
>>
>> _______________________________________________
>> orbit-user mailing list
>> orbit-user at orbit-lab.org
>> http://orbit-lab.org/cgi-bin/mailman/listinfo/orbit-user
>
>
> -- 
> Mesut Ali Ergin
> ergin at winlab.rutgers.edu
>
> Rutgers University, WINLAB,
> Technology Centre of New Jersey,
> 671 Rt. 1 South, North Brunswick,
> New Jersey, 08902-3390, USA
>
> Phone: 862-368-6620
> Fax:   732-932-6882
> _______________________________________________
> orbit-user mailing list
> orbit-user at orbit-lab.org
> http://orbit-lab.org/cgi-bin/mailman/listinfo/orbit-user