[orbit-user] Problem with loading Image

[Mesut Ali Ergin]

Well, if you have the first step correct, then you can check the rest 
from the boot progress by logging on to that serial console

telnet 10.1.101.17 3025  (assuming sandbox 1 node1-1 , check here for 
the others http://www.orbit-lab.org/wiki/NodeHandler/FAQ/SandBoxConvention)

Make sure you have a getty on tty to login and check further from the 
serial console.

--
MAE


Aaron Fernandes wrote:
> 
> Yes we are turning that on. omf stat shows powered on as well.
> 
> Just to give more details, we are trying to compile a new kernel 2.6.16 
> and boot from it.
> 
> 
> We took care of three important things listed on the Orbit website while 
> compiling the new kernel:
> 
>     * a serial console @9600,8,n,1 on the first serial port (I am 
> assuming that we only have to include the option in grubs menu.lst 
> console=ttyS0,9600n8 .. after selecting the option of serial port in 
> configuration of new kernel)
> 
>     * driver support for 2 Marvell gigabit network card
> 
>     * and dhcp on the 2nd wired interface (dhcp client ON by default )
> 
> 
> Is there anything we have to do with nodehandler client or something.. 
> due to which it is not able to ssh. Are we missing anything on eth1.
> 
> Thanks,
> 
> Aaron
> 
> 
> Quoting Mesut Ali Ergin <ergin at eden.rutgers.edu>:
> 
>> Aaron,
>>
>> Have you turned the node on (and wait about a minute) after imaging was
>> completed?
>>
>> e.g.,
>>
>> omf tell on 1,1
>>
>> Best,
>>
>> -- 
>> MAE
>>
>> Aaron Fernandes wrote:
>>> Hi
>>>
>>> I am trying a load a saved image on to a node.
>>>
>>> The image loads correctly but when I try to ssh into the node, it
>>> gives an error saying
>>>
>>> "ssh: connect to host node1-1 port 22: No route to host"
>>>
>>> Am I missing something when saving the image. Please help.
>>>
>>> Thanks.
>>>
>>> -Aaron
>>>
>>> _______________________________________________
>>> orbit-user mailing list
>>> orbit-user at orbit-lab.org
>>> http://orbit-lab.org/cgi-bin/mailman/listinfo/orbit-user
>>
>>
>> -- 
>> Mesut Ali Ergin
>> ergin at winlab.rutgers.edu
>>
>> Rutgers University, WINLAB,
>> Technology Centre of New Jersey,
>> 671 Rt. 1 South, North Brunswick,
>> New Jersey, 08902-3390, USA
>>
>> Phone: 862-368-6620
>> Fax:   732-932-6882
>> _______________________________________________
>> orbit-user mailing list
>> orbit-user at orbit-lab.org
>> http://orbit-lab.org/cgi-bin/mailman/listinfo/orbit-user
> 
> 
> _______________________________________________
> orbit-user mailing list
> orbit-user at orbit-lab.org
> http://orbit-lab.org/cgi-bin/mailman/listinfo/orbit-user


-- 
Mesut Ali Ergin
ergin at winlab.rutgers.edu

Rutgers University, WINLAB,
Technology Centre of New Jersey,
671 Rt. 1 South, North Brunswick,
New Jersey, 08902-3390, USA

Phone: 862-368-6620
Fax:   732-932-6882