Changes between Version 3 and Version 4 of Tutorials/k0SDR/Tutorial02

Timestamp:

Jun 12, 2017, 9:06:03 PM (7 years ago)

Author:

nilanjan

Comment:

—

Tutorials/k0SDR/Tutorial02

@@ -8 +8 @@
 === Hardware / Software Resources utilized ===
  1. Grid nodes with a USRP connect via Ethernet.
- 2. ''ubuntu-14-04-64bit-sdr.ndz'': disk image loaded onto nodes. This image has all the precompiled - software required to configure the USRP N210s and all the required GNU Radio software libraries. The USRP N210's interface with the node is already configured.
+ 2. ''baseline-sdr.ndz'': disk image loaded onto nodes. This image has all the precompiled - software required to configure the USRP N210s and all the required GNU Radio software libraries. The USRP N210's interface with the node is already configured.
  3. GNU Radio - software library to create SDR. Click here for [http://gnuradio.org/redmine/projects/gnuradio/wiki/WhatIsGR additional info].
  4. USRP N210 - hardware platform for SDR. Click here for [http://gnuradio.org/redmine/projects/gnuradio/wiki/Hardware#Ettus-Research-USRP-Devices more info].
@@ -25 +25 @@
 }}}
 
- * Image the node to use as a spectrum analyzer - check [https://www.orbit-lab.org/status/orbit/ inventory status] to find a node with a USRP N210. In this example we'll use the node 19-19. Load the image ''ubuntu-14-04-64bit-sdr.ndz'' and then turn the node on.
+ * Image the node to use as a spectrum analyzer - check [https://www.orbit-lab.org/status/orbit/ inventory status] to find a node with a USRP N210. In this example we'll use the node 19-19. Load the image ''baseline-sdr.ndz'' and then turn the node on.
 {{{
-nilanjan@console.grid:~$ omf load -i ubuntu-14-04-64bit-sdr.ndz -t node19-19
+nilanjan@console.grid:~$ omf load -i baseline-sdr.ndz -t node19-19
 :
 :