====== LV-67J Specifics ======



'''Bios Flashing Instructions'''[[BR]]

[[CollapsibleStart(Make A USB Flash disk.)]][[Include(Hardware/hNodes/cNodeVer3/dAssembly/cBios/USBBoot)]][[CollapsibleEnd]]
----


======= Bios Setup =======

* Go to tab Exit
 * Load Default settings
 * Then enable the following options
* Main
 * Boot Features
  * enable quickboot
  * disable console redirection
   
* Advanced
 * network config
  * disable advanced lan oprom
* Others
 * hardware monitor
  * warning temp = 80c
  * enable cpu fan temp control
   * temp = 40c
   * threshold = 5c
* Boot (use + and - to move items, arrow keys to navigate. shift+1 toggles enabled state)
 1. usb hdd
 2. usb cd
 3. HDD0
 4. internal shell
 5. move all others below these, and disable with shift+1

NOTE: Let the BIOS reboot till the node boots up properly [[br]]
======= Troubleshooting =======
* Step 1 is to reset bios to default settings and reset options as above.
* If this fails, remove power from the motherboard, move the cmos jumper to position 2, wait at least 30 seconds, and then move it back. Then reset bios options as above.
 * Jumper: JRTC
 * Type: Onboard 3-pin jumper

  || JRTC || Mode ||
  || 1-2 || Clear CMOS ||
  || 2-3 || Normal Operation ||
  || Default setting: || 2-3 ||

[[Image(jrtc.png)]]

* If bios is corrupted, reflash according to directions at [http://www.commell.com.tw/Support/Product%20Technical%20Support/LV-67K.htm]
* When flashing bios, be sure to use -savemac option.
* If mac is lost, MACtool below can be used.

urls used 

[http://www.asrock.com/support/Download/MacTool.asp]

[http://www.paoloiannelli.com/tag/flashdisable/]