== CMC APIs, Access Control Policy == This is the only service using the old API (i.e. gridservices running on port 5012 as opposed to 5022). == Initial CMC Config File == The cmc config file is /etc/gridservices/cmc.yaml. The Orbit administrator creates this file. Once created, only the 'node_alias' and the 'inactive_list' fields are dynamically updated by the CMC. At creation, the administrator can set a list of nodes to INACTIVE by specifying the node coordinates in the 'inactive_list' of the testbed. {{{ communicators: default: port: 9030 ip: 10.1.200.1 primaryIF: "10.0" testbeds: sb1: baseIP: 10.1.101. ip_block: lambda {|x,y| "10.1.101.#{x * 16 + y}"} x_max: 1 y_max: 2 node_alias: [] inactive_list: "[[1,1], [1,3]]" 12vStatus: 0.064 5vStatus: 0.032 3vStatus: 0.016 sb2: baseIP: 10.1.102. ip_block: lambda {|x,y| "10.1.102.#{x * 16 + y}"} x_max: 1 y_max: 2 node_alias: [] inactive_list: "[]" 12vStatus: 0.064 5vStatus: 0.032 3vStatus: 0.016 sb3: baseIP: 10.1.103. ip_block: lambda {|x,y| "10.1.103.#{x * 16 + y}"} x_max: 1 y_max: 2 node_alias: [] inactive_list: "[]" 12vStatus: 0.064 5vStatus: 0.032 3vStatus: 0.016 sb4: baseIP: 10.1.104. ip_block: lambda {|x,y| "10.1.104.#{x * 16 + y}"} x_max: 1 y_max: 2 node_alias: [] inactive_list: "[]" 12vStatus: 0.064 5vStatus: 0.032 3vStatus: 0.016 sb5: baseIP: 10.1.105. ip_block: lambda {|x,y| "10.1.105.#{x * 16 + y}"} x_max: 1 y_max: 2 node_alias: [] inactive_list: "[]" 12vStatus: 0.064 5vStatus: 0.032 3vStatus: 0.016 sb6: baseIP: 10.1.106. ip_block: lambda {|x,y| "10.1.106.#{x * 16 + y}"} x_max: 1 y_max: 2 node_alias: [] inactive_list: "[]" 12vStatus: 0.064 5vStatus: 0.032 3vStatus: 0.016 sb7: baseIP: 10.1.107. ip_block: lambda {|x,y| "10.1.107.#{x * 16 + y}"} x_max: 1 y_max: 2 node_alias: [] inactive_list: "[]" 12vStatus: 0.064 5vStatus: 0.032 3vStatus: 0.016 sb8: baseIP: 10.1.108. ip_block: lambda {|x,y| "10.1.108.#{x * 16 + y}"} x_max: 1 y_max: 2 node_alias: [] inactive_list: "[]" 12vStatus: 0.064 5vStatus: 0.032 3vStatus: 0.016 grid: baseIP: 10.1. ip_block: lambda {|x,y| "10.1.#{x}.#{y}"} x_max: 20 y_max: 20 node_alias: [] inactive_list: "[]" 12vStatus: 0.064 5vStatus: 0.032 3vStatus: 0.016 sb9: baseIP: 10.1.109. ip_block: lambda {|x,y| "10.1.109.#{x * 16 + y}"} x_max: 8 y_max: 8 node_alias: [] inactive_list: "[]" 12vStatus: 0.064 5vStatus: 0.032 3vStatus: 0.016 }}} == Config File Updates == On startup, CMC will dynamically update the 'node_alias' field of this config file based on the existing interfaces specified in the inventory database. If there are no nodes for an interface, then "NONE" is specified for that interface. {{{ node_alias: - "Atheros 802.11a/b/g: [[13,14], [20,20], [1,17], [17,11], [11,6]]" - "Intel 802.11a/b/g: NONE" - "Belkin Bluetooth USB: NONE" - "Crossbow Telos Rev.B MOTE: NONE" - "GNURadio USRP: NONE" - "Marvell 88E8001 Gigabit Ethernet Controller: NONE" - "Intel Corporation 82540EM Gigabit Ethernet Controller: NONE" - "Intel 802.11a/b/g: [[11,1], [20,4], [15,15], [20,18], [20,8]]" }}} The 'inactive_list' field will be dynamically updated for whenever the user sets a node to ACTIVE/INACTIVE. When a node (that is currently ACTIVE) is set to INACTIVE, the node coordinates are added to this field. Again when a node that is currently INACTIVE is set to ACTIVE, the coordinates for that node are removed from the 'inactive_list'. === Example === {{{ A) inactive_list: "[]" B) wget -O - "http://cmc:5012/cmc/nodeSetNodeInactive?domain=grid.orbit-lab.org&nodes=[1,1..2]" inactive_list: "[[1,1], [1,2]]" C) wget -O - "http://cmc:5012/cmc/nodeSetNodeActive?domain=grid.orbit-lab.org&nodes=[1,1..2]" inactive_list: "[]" }}}