Changes between Version 7 and Version 8 of Hardware/hNodes/cNodeVer5


Ignore:
Timestamp:
Feb 14, 2017, 6:11:46 PM (7 years ago)
Author:
jkol
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • Hardware/hNodes/cNodeVer5

    v7 v8  
    77==== Hardware ====
    88
    9 NUC + CM3 + B200mini + charger and PS
     9NUC + CM3 (rev. 4) + B205mini-i + charger and PS
    1010
    1111===== NUC =====
    1212
    13 Two versions: [http://www.intel.com/content/www/us/en/nuc/nuc-kit-nuc6i7kyk-features-configurations.html Skull Canyon] with 6th generation i7-6770HQ processor, 16 GB RAM, 256 GB HD and small...
     13Two versions:
     141. Small: [https://www-ssl.intel.com/content/www/us/en/nuc/nuc-kit-nuc6i5syk.html NUC6i5SYK] with 6th generation i5-6160U processor, 32 GB RAM, 256 GB SSD
     152. Large: [http://www.intel.com/content/www/us/en/nuc/nuc-kit-nuc6i7kyk-features-configurations.html NUC6i7KYK] (aka "Skull Canyon") with 6th generation i7-6770HQ processor, 32 GB RAM, 256 GB SSD
    1416
    1517===== SDR Front End =====
    1618
    17 The SDR front-end [https://www.ettus.com/product/details/USRP-B200mini-i Ettus Research USRP B200mini] is a full-duplex transceiver platform with tuning range of 70 MHz to 6 GHz with 56 MGHz of instantaneous bandwidth connected over USB 3.0 to the host. [[Image(B205.png, width=200)]]
     19The SDR front-end [https://www.ettus.com/product/details/USRP-B205mini-i Ettus Research USRP B205mini] is a full-duplex transceiver platform with tuning range of 70 MHz to 6 GHz with 56 MGHz of instantaneous bandwidth connected over USB 3.0 to the host.
     20
     21[[Image(B205.png, width=200)]]
    1822
    1923
    20 ==== Case Extension ====
     24==== Standard 4x4 Case Extension ====
    2125
    22 The "add-on" case extension to the NUC contains the B205 and CM. It is a 3D printable part ([attachment:"Small NUC Case Ext v2.stl" STL file]). Best results have been achieved using either ABS or HIPS filament.
     26The "add-on" case extension to the small version contains the B205mini-i USRP and CM3. It is a 3D printable part ([attachment:"Small NUC Case Ext v2.stl" STL file]) compatible with the "short" and "tall" (2.5" drive capable) versions of the 4x4 inch NUC platform. Best 3D print results have been achieved using either ABS or HIPS filament. SMA connections are provided on the outside of the case for the USRP's TX/RX, RX2, and a 10MHz or PPS time reference.
    2327
    2428===== Battery Operation =====
    2529
    26 Second extension enables car deployment and graceful shutdown. Uses...
     30A second case extension enables car deployment and graceful shutdown using the [http://www.mini-box.com/OpenUPS2 OpenUPS2] power supply.
    2731
    2832===== Assembly instructions =====
    2933
     34These instructions assume a build based on the "short" NUC6i5SYK. Use of a taller 2.5" drive capable NUC will necessitate longer standoffs or screws.
     35
     36Parts:
     37* 1x 3D printed case extension
     38* 8x M2.5 x 0.45mm thread, 20mm long male-female standoff
     39* 4x M2.5 x 0.45mm thread, 12mm long round-head screw
     40* 3x 6" right-angle SMA male to regular SMA female cable
     41* 1x 6" SuperSpeed USB 3.0 A Male to Micro B Male Cable
     42* connectors & cabling to connect CM3 to NUC motherboard
     43  * 6" "floppy power" to TE Connectivity (for standby power)
     44  *
    3045Internal wiring
    3146[[Image(InternalConnections.png)]]