Changes between Version 46 and Version 47 of Other/Summer/2015/aSDR3

Timestamp:

Jul 30, 2015, 6:32:30 PM (9 years ago)

Author:

catle3006

Comment:

—

Other/Summer/2015/aSDR3

@@ -97 +97 @@
 ===== Spectrum Analyzer  =====
 
-||= '''Hardware Spectrum Analyzer – Tektronix SA2600''' =||= '''Software Spectrum Analyzer – RTLSDR Scanner''' =||
+||= '''Category''' =||= '''Hardware Spectrum Analyzer – Tektronix SA2600''' =||= '''Software Spectrum Analyzer – RTLSDR Scanner''' =||
 |-----------------------------------------------------------
-|| 1. Wire measurement must be connect with 30dB attenuator in order to avoid saturation ||\
+{{{#!th rowspan=2
+[#FontStyles Characteristics]
+}}}
+|| '''Wire Measurement''' must be connect with 30dB attenuator in order to avoid saturation ||\
 || '''PROS:''' user-friendly, convenient, remote access, software-based spectrum analyzer ||
-|| 2. Wireless measurement requires much higher gain than using wire ||\
+|| '''Wireless Measurement''' requires much higher gain than using wire ||\
 || '''CONS:''' Realtek 2832 EZCap can’t tune to frequencies higher than 1.8GHz ||
+|-----------------------------------------------------------
+||= [#Graph Graphs] =||\
 || [[Image(http://www.orbit-lab.org/raw-attachment/wiki/Other/Summer/2015/aSDR3/Tektronix.png, height=300, center)]] ||\
 || [[Image(http://www.orbit-lab.org/raw-attachment/wiki/Other/Summer/2015/aSDR3/RTLSDR.png, height=300, center)]]  ||
@@ -152 +157 @@
 }}}
 
+* '''PSS''' ''Primary Synchronization Signal'' 
+* '''SSS''' ''Secondary Synchronization Signal''
+* '''CFI''' 
+
+'''CSRS'''
 ==== Experiment 2: Waterfall Plot====
 {{{#!html
@@ -188 +198 @@
 }}}
 
-==== Experiment 3: ====
+==== Experiment 3: Varying Bandwidths====
+
+==== Experiment 4: TDD with Varying Bandwidths====