Changes between Version 19 and Version 20 of Hardware/hNodes/cNodeVer3/dAssembly/cBios/aLV67C

Timestamp:

Aug 30, 2011, 9:39:20 PM (13 years ago)

Author:

ssugrim

Comment:

—

Hardware/hNodes/cNodeVer3/dAssembly/cBios/aLV67C

@@ -18 +18 @@
  1. Once in the bios, goto the boot order menu and do the following:
   1. Disable the USB FDC: (select it and press x)
-  1. Enable the USB HDDL !SanDisk Cruzer Micro-(USB [[BR]][[Image(EnableCruzer.JPG, 300)]]
+  1. Enable the USB HDDL !SanDisk Cruzer Micro-(USB [[BR]][[Image(EnableCruzer.jpg, 300)]]
   1. Save and exit
  1. After you save and exit the system will power down. If left alone it power back up and proceed to boot from the USB disk.
@@ -32 +32 @@
  1. The bios is now configured. Reboot once more and check the serial console for bios boot messages. It should try to pxe from the leftmost interface (verify the mac address).
 
-=== 8/2011 ===
+=== 8/2011 === #PreviousCmosVideo
 The second batch of Lv67c motherboards do not need to have their bios flashed, only reconfigured.
- 1. Attach requisite cables and Cards[[BR]][[Image(AttachVideo2.jpg, 300)]] #PreviousCmosVideo
+ 1. Attach requisite cables and Cards[[BR]][[Image(AttachVideo2.jpg, 300)]] 
   * Serial Cable
   * Video card with monitor cable attached (Do not use the onboard VGA)
-  * Ethernet cable into 
+  * Ethernet cable into Leftmost port
   * 24 pin and 4 pin power headers
   * Keyboard