Changes between Version 28 and Version 29 of Internal/Mapping/Calibration


Ignore:
Timestamp:
Sep 6, 2007, 9:15:03 PM (13 years ago)
Author:
zhibinwu
Comment:

Legend:

Unmodified
Added
Removed
Modified
  • Internal/Mapping/Calibration

    v28 v29  
    4444=== Estimation of Calibration Workload ===
    4545
    46 Each card shall be placed in TX and RX experiment for both 5 seconds per channel per power setting. Suppose there are 24 [11(b/g)+13(a)] channels, 5 power settings. Each card takes 5*2*24*5 seconds = 20 minutes to calibarate.
     46Each card shall be placed in TX and RX experiment for both 5 seconds per channel per power setting. Suppose there are 24 [11(b/g)+13(a)] channels, 5 power settings. Each card takes 5*2*24*5 seconds = 20 minutes to calibrate.
    4747
    4848Some other overheads:
    49  * There are some 5~8 seconds overhead to start the expriments.
     49 * There are some 5~8 seconds overhead to start the experiments.
    5050 * Powering on the node needs to take around 2 minutes.
    5151 * Loading a image on the node takes 3 minutes.
     
    5454== For developers ==
    5555 * [wiki:Internal/Mapping/Calibration/DesignSpec Design Specification for Calibration Experiment]
    56  *  Design of "moitor_oml" program
     56 * [wiki:Internal/Mapping/Calibration/MonitorOmlCode Design of "moitor_oml" program]