Changes between Version 8 and Version 9 of Internal/NoiseGenerator/Hardware/BaBo


Ignore:
Timestamp:
Feb 17, 2007, 12:35:32 AM (17 years ago)
Author:
anonymous
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • Internal/NoiseGenerator/Hardware/BaBo

    v8 v9  
    33[[TOC(depth=3)]]
    44
    5 !BaBo performs baseband I/Q data acquistion and generation, data processing and transmission to upstream data servers through a USB interface.
     5!BaBo performs baseband I/Q data acquistion and generation, data processing and transmission to upstream data servers through a USB interface. !BaBo top-level schematic is [attachment:Babo-13-Global-Schematic.pdf attached].
    66
    77== Hardware Components ==
    88
    9 First you must upload the firmware onto the FX2. Once the firmware is ready on the FX2. Once the FX2 is programmed, it programs the FPGA by feeding it a sequence of bits or bytes that configure all the gates and datapaths and doohickeys inside.
     9!BaBo is centered around three components:
    1010
    1111 * Cypress EZ-USB FX2 - CY7C68013 USB microcontroller, which is an 8051 core with a USB2 interface
     12 * Xilinx XC3S400-4TQ144C FPGA
     13 * Analog Device 
     14
     15== PCB ==
     16
     17== Programming Notes ==
     18First you must upload the firmware onto the FX2. Once the firmware is ready on the FX2. Once the FX2 is programmed, it programs the FPGA by feeding it a sequence of bits or bytes that configure all the gates and datapaths and doohickeys inside.
    1219
    1320Relevant documentation extraction:
    … …  
    4855
    4956}}}
    50 
    51  * Xilinx XC3S400-4TQ144C FPGA
    52 
    53 
    54 
    55 == PCB ==
    56 
    57 == Programming Notes ==
    58 
    5957== Appendix ==