Changes between Version 18 and Version 19 of Tutorials/k0SDR/Tutorial05


Ignore:
Timestamp:
Jun 15, 2015, 10:42:49 PM (6 years ago)
Author:
stojadin
Comment:

Legend:

Unmodified
Added
Removed
Modified
  • Tutorials/k0SDR/Tutorial05

    v18 v19  
    119119}}}
    120120
    121 This experiment consists of a receiver centered at 800 MHz, with the bandwidth of 5 MHz, and the transmitter that runs for 5 seconds, transmitting a SINE waveform centered at frequencies of 798, 799, 800, 801 and 802 MHz for 1 second each. The code needs to be saved in a file named ''experiment.rb''. It's assumed that the Wiserd application definition for OEDL is available in the file named ''wiserd.rb''. After imaging the nodes and making sure they are turned on, the experiment can be run using the command
     121This experiment consists of a receiver centered at 800 MHz, with the bandwidth of 5 MHz, and the transmitter that runs for 5 seconds, transmitting a SINE waveform centered at frequencies of 798, 799, 800, 801 and 802 MHz for 1 second each. The code needs to be saved in a file named ''experiment.rb''. It's assumed that the [http://www.orbit-lab.org/attachment/wiki/Tutorials/k0SDR/Tutorial05/wiserd.rb Wiserd application definition] for OEDL is available in the file named ''wiserd.rb''. After imaging the nodes and making sure they are turned on, the experiment can be run using the command
    122122
    123123{{{
     
    142142For the described experiment, octave will then produce the image shown below.
    143143
    144 [[Image()]]
     144[[Image(octave_plot.jpg)]]