Changes between Version 4 and Version 5 of Tutorials/k0SDR/Tutorial06


Ignore:
Timestamp:
Oct 16, 2014, 6:43:13 PM (10 years ago)
Author:
stojadin
Comment:

Legend:

Unmodified
Added
Removed
Modified
  • Tutorials/k0SDR/Tutorial06

    v4 v5  
    77
    88=== Transmitting a signal using wiserd ===
    9 Wiserd producer module ''signal_from_file'' can be used for transmission of a custom signal. The signal needs to be saved in a binary file, containing 32bit float values of I and Q samples of the signal. To use wiserd on a USRP X310 equipped node (e.g. node3-1 on grid.orbit-lab.org), we can use the ''stojadin-wiserd-x310.ndz'' image, which has the latest version of wised preinstalled in the root directory. After running wiserd, we can use the following commands in order to set the required parameters (in this case we assume the central transmission frequency of 700 MHz, signal bandwidth of 200 MHz, transmitter gain of 20 dB and our signal is stored in the ''signal.bin'' file):
     9Wiserd producer module ''signal_from_file'' can be used for transmission of a custom signal. The signal needs to be saved in a binary file, containing 32bit float values of I and Q samples of the signal. To use wiserd on a USRP X310 equipped node (e.g. node3-1 on grid.orbit-lab.org), we can use the ''wiserd-x310.ndz'' image, which has the latest version of wised preinstalled in the root directory. After running wiserd, we can use the following commands in order to set the required parameters (in this case we assume the central transmission frequency of 700 MHz, signal bandwidth of 200 MHz, transmitter gain of 20 dB and our signal is stored in the ''signal.bin'' file):
    1010
    1111{{{