Changes between Version 1 and Version 2 of Tutorials/k0SDR/Tutorial13

Timestamp:

Sep 8, 2015, 6:37:31 PM (10 years ago)

Author:

prasanthi

Comment:

—

Tutorials/k0SDR/Tutorial13

@@ -1 @@
-******** add content **************8
+== Zynq-based WISER platform - Start-up test ==
+
+[[TOC(Tutorials/k0SDR*)]]
+
+=== Description ===
+This tutorial shows how to load the Zynq-based WISER platform (Zedboard + ADFMCOMMS1) on ORBIT.
+
+=== Hardware / Software Resources utilized ===
+ 1. An SB6 node with WISER platform connected to it.
+ 2. ''wiser_sb6_zedboard.ndz'': disk image.
+
+
+=== Set up ===
+ * To get started first make a reservation on the [https://www.orbit-lab.org/schedule/ Orbit Scheduler] for using the SB6.
+
+ * After logging into SB6 console, image one of the nodes
+{{{
+omf load -i wiser_sb6_zedboard.ndz -t node1-1
+}}}
+
+ * Once imaging is done, turn the node on
+{{{
+omf tell -a on -t node1-1
+}}}
+
+ * Wait for the node to turn on and log in
+{{{
+ssh root@node1-1
+}}}
+ 
+=== Loading the Zedboard 
+The 
+
+=== Running a start up test