Changes between Version 4 and Version 5 of Tutorials/oai-docker


Ignore:
Timestamp:
Jun 25, 2019, 7:23:32 AM (5 years ago)
Author:
nimakris
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • Tutorials/oai-docker

    v4 v5  
    160160}}}
    161161
    162 * In order to attach a UE to the network, follow the instructions for the LTE UEs of Orbit, mentioned here: [https://www.orbit-lab.org/wiki/Hardware/fDevices/dWide "Available Devices"], [https://www.orbit-lab.org/wiki/Software/hDrivers#NetgearAC341U "Connecting an LTE UE to the network"]. All the Orbit UEs are already registered with the HSS, so they should require no further configuration. The default APN that you should use with this network is ''oai.ipv4''.
     162* **In order to attach a UE to the network, follow the instructions for the LTE UEs of Orbit, mentioned here: [https://www.orbit-lab.org/wiki/Hardware/fDevices/dWide "Available Devices"], [https://www.orbit-lab.org/wiki/Software/hDrivers#NetgearAC341U "Connecting an LTE UE to the network"]. All the Orbit UEs are already registered with the HSS, so they should require no further configuration. The default APN that you should use with this network is ''oai.ipv4''.**
     163You can use the lte-ue.ndz image for loading it on a node equipped with an LTE dongle. The image has pre-installed all the required drivers for attaching the LTE dongle on the node, and only requires from you to send the commands for attaching it to the network.
    163164* Once your experiment ends, you can bring down safely all the dockers with:
    164165