Changes between Version 23 and Version 24 of Hardware/hNodes/cNodeVer3/dAssembly/cBios/aLV67C

Timestamp:

Dec 16, 2011, 10:20:11 PM (12 years ago)

Author:

seskar

Comment:

—

Hardware/hNodes/cNodeVer3/dAssembly/cBios/aLV67C

@@ -1 @@
-= Assembling the LV-67C based Node =
-
+== Assembling the LV-67C based Node ==
 
 The assembling of new LV-67C based orbit node can be broken down into 3 tasks.
@@ -8 +7 @@
  1. [#CaseAssembly Install Motherboard / Power supply]
 
-----
-
 == Flash The LV67-C bios == #Lv67cBios
-=== 8/30/2011 ===
-We've simiplified the process a little with the usage of an bootable flash disk. There is also a slight change in the order of assembly because of an issue with CMOS reset after inserting new hardware.
+
  1. After removing the lv-67c kit from it wrapping attach the pcm-cia and mini-pice cards (As [#CaseAssembly below]).
  1. Attach the video card assembly as [#PreviousCmosVideo prior]
@@ -32 +28 @@
  1. The bios is now configured. Reboot once more and check the serial console for bios boot messages. It should try to pxe from the leftmost interface (verify the mac address).
 
-=== 8/2011 === #PreviousCmosVideo
 The second batch of Lv67c motherboards do not need to have their bios flashed, only reconfigured.
  1. Attach requisite cables and Cards[[BR]][[Image(AttachVideo2.jpg, 300)]] 
@@ -71 +66 @@
  1. The node should now attempt to boot from pxe and if dhcp and tftp are setup correctly, the node should be able to boot into the pxe image. 
 
-=== 6/2011 ===
+
  You will need the USB Thumb drive which has the bios and the utility to boot the motherboard from.[[BR]]
  You will need a Video Card to flash the bios, the motherboard does not have one.[[BR]]