wiki:Internal/OpenFlow/OrbitSwitches/sw-sb-combined

Version 10 (modified by akoshibe, 11 years ago) ( diff )

sw-sb-01 (Aggregate SandBox Switch 1)

sw-sb-01 is a replacement for legacy sandbox switches for sb 1,2,5,7, and 8. It also includes Aruba VLAN (4) ports.

Access : 172.16.0.253

Testbed switch layout

Each testbed requires 2 ports each for CM, Control, and Data links for the nodes, a Control VLAN link to the Console, and a trunk link to the top switch. As an OpenFlow switch, we also need a dedicated port to connect the switch to a controller. In the aggregate switch ports are allocated in the following numbers:

  • CM: 12 ports (2 per SandBox)
  • Control: 18 ports - 12 for nodes, + 6 for Console links
  • Data: 12 (as with CM)
  • OpenFlow control VLANs: 2 (to controller - two to make things tidy)
  • Trunk: 4 (leftover)

VLANs

VLAN 3 (CM) is consistent across all SandBoxes. Each sb has its own Control and Data VLANs as such:

TestbedControl VLANData VLAN
sb11112
sb21314
sb51920
sb62122
sb72324
sb82526

In addition, VLAN 100 is the defacto VLAN for the !OpenFLow control channel at WINLAB.

Port Assignments

Port  Name           Status Type        VLAN
 0/ 1 geth0/1        down   Tunnel      11  (sb1_ctrl)
 0/ 2 geth0/2        down   Tunnel      11  (sb1_ctrl)
 0/ 3 geth0/3        up     Tunnel      11  (sb1_ctrl)
 0/ 4 geth0/4        down   Tunnel      12  (sb1_data)
 0/ 5 geth0/5        down   Tunnel      12  (sb1_data)
 0/ 6 geth0/6        up     Tunnel      4   (VLAN0004)
 0/ 7 geth0/7        up     Tunnel      13  (sb2_ctrl)
 0/ 8 geth0/8        up     Tunnel      13  (sb2_ctrl)
 0/ 9 geth0/9        up     Tunnel      13  (sb2_ctrl)
 0/10 geth0/10       up     Tunnel      14  (sb2_data)
 0/11 geth0/11       up     Tunnel      14  (sb2_data)
 0/12 geth0/12       up     Tunnel      4   (VLAN0004)
 0/13 geth0/13       up     Tunnel      19  (sb5_ctrl)
 0/14 geth0/14       up     Tunnel      19  (sb5_ctrl)
 0/15 geth0/15       up     Tunnel      19  (sb5_ctrl)
 0/16 geth0/16       up     Tunnel      20  (sb5_data)
 0/17 geth0/17       up     Tunnel      20  (sb5_data)
 0/18 geth0/18       up     Tunnel      4   (VLAN0004)
 0/19 geth0/19       up     Tunnel      23  (sb7_ctrl)
 0/20 geth0/20       up     Tunnel      23  (sb7_ctrl)
 0/21 geth0/21       up     Tunnel      23  (sb7_ctrl)
 0/22 geth0/22       up     Tunnel      24  (sb7_data)
 0/23 geth0/23       up     Tunnel      24  (sb7_data)
 0/24 geth0/24       up     Tunnel      4   (VLAN0004)
 0/25 geth0/25       up     Tunnel      25  (sb8_ctrl)
 0/26 geth0/26       up     Tunnel      25  (sb8_ctrl)
 0/27 geth0/27       up     Tunnel      25  (sb8_ctrl)
 0/28 geth0/28       up     Tunnel      26  (sb8_data)
 0/29 geth0/29       up     Tunnel      26  (sb8_data)
 0/30 geth0/30       up     Tunnel      4   (VLAN0004)
 0/31 geth0/31       down   Tunnel      29  (VLAN0029)
 0/32 geth0/32       down   Tunnel      29  (VLAN0029)
 0/33 geth0/33       up     Tunnel      29  (VLAN0029)
 0/34 geth0/34       down   Tunnel      29  (VLAN0029)
 0/35 geth0/35       up     Tunnel      29  (VLAN0029)
 0/36 geth0/36       down   Tunnel      29  (VLAN0029)
 0/37 geth0/37       down   Tunnel      29  (VLAN0029)
 0/38 geth0/38       up     Tunnel      29  (VLAN0029)
 0/39 geth0/39       down   Tunnel      29  (VLAN0029)
 0/40 geth0/40       down   Tunnel      29  (VLAN0029)
 0/41 geth0/41       down   Tunnel      29  (VLAN0029)
 0/42 geth0/42       down   Tunnel      29  (VLAN0029)
 0/43 geth0/43       up     Tunnel      29  (VLAN0029)
 0/44 geth0/44       down   Tunnel      29  (VLAN0029)
 0/45 geth0/45       up     Tunnel      1   (Network)
 0/46 geth0/46       up     Tunnel      1   (Network)
 0/47 geth0/47       down   Tunnel      4   (VLAN0004)
 0/48 geth0/48       up     Tunnel      4   (VLAN0004)
 0/49 tengeth0/49    up     Trunk       1,11-14,17,19-20,23-26,29
 0/50 tengeth0/50    down   Access      -

Legacy Configurations

All forms of spanning tree (STP, PVST+) are disabled for compliance with OpenFlow and Node-handler/Agent services. From configuration mode:

spanning-tree disable
no spanning-tree vlan 1,3,11-14,19-26

vlans are named from the vlan context.

Interface-range contexts are used for batch configuration of similar ports. Below is the configuration of the CM and SB1 Control VLAN ports:

!(config)# interface range gi 0/1-12
!(config-if-range)# switchport access vlan 3
!(config-if-range)# interface range gi 0/13-14   
!(config-if-range)# sw acc vlan 11 

Similarly, the trunk ports:

interface range gi 0/43-48
switchport mode trunk
switchport trunk allowed vlan 3,11-14,19-26
switchport trunk native vlan 1

OpenFlow configurations

Each VLAN is its own virtual switch. The following is the contents of openflow.conf.

sw-sb-01> showswitch
vlan    ports                                           secure channel
----    -----                                           --------------
12      31, 32, 48.12                                   connected
14      33, 34, 48.14                                   connected
20      35, 36, 48.20                                   connected
22      37, 38, 48.22                                   connected
24      39, 40, 48.24                                   connected
26      41, 42, 48.26                                   connected
sw-sb-01> cat /mnt/openflow.conf
setvsi 12 31,32,48.12 tcp 172.16.0.4:6633 dpid 0x001010123132
setvsi 14 33,34,48.14 tcp 172.16.0.4:6633 dpid 0x001010143134
setvsi 20 35,36,48.20 tcp 172.16.0.4:6633 dpid 0x001010203230
setvsi 22 37,38,48.22 tcp 172.16.0.4:6633 dpid 0x001010223232
setvsi 24 39,40,48.24 tcp 172.16.0.4:6633 dpid 0x001010243234
setvsi 26 41,42,48.26 tcp 172.16.0.4:6633 dpid 0x001010263236

Attachments (1)

Download all attachments as: .zip

Note: See TracWiki for help on using the wiki.