OpenFlow Documentation

• Controllers

The NEC IP8800, Sandbox 9

• IP8800 Quickstart guide - A "Handbook" summarizing IP8800 (with OpenFlow) administration

• GEC7 Demo/Tutorial - Bit Torrent Demo
• Setting up the NEC Switch - Basic configurations to get the switch working.
• Configuring the Switch - Miscellaneous notes about configuration.
• Firmware Upgrade - Upgrading the switch with OpenFlow firmware
• Virtual Switches - Details on setting up virtual switches
• Building Sandbox 9 - The makings of the OpenFlow enabled Sandbox setup
• Infrastructure - Configs for sw-top, and other backbone switches

The Quanta LB9A (the other OpenFlow switch)

• Quanta LB9A/u-boot primer - a "guide" to the facilities for configuring the switch.
• using XORPlus - The quanta as a regular switch powered by XORPlus
• Openflow Setup for the Quanta Switch - Notes on what is required to setup the Quantas in OpenFlow mode

NetFPGA

• Setting up the Host - Installing CentOS, the card, drivers, ect.
  • The NetFPGA host setup Diaries - Tales from the backend
  • Notes - the background work
• OpenFlow How-To - Getting started with the OpenFlow enabled Sandbox 9 setup
• Tunneling Openflow Switch notes - Notes about OF1 and OF2.

GEC 9 Demo Notes

• Demo AP Image - The Node image for the DEMO AP
• Open VSwitch Wimax - Installing the open Vswitch software on the Wimax Base station's management machine

SB9 Usage

• NETFPGA-OpenFlow Tutorial - Set up, starter experiments and guidelines
• OpenVswitch Node Image - How to set up a sandbox node with Open vSwitch
• Network topologies with OpenFlow - Setting up "point-to-point" links between nodes on the same switch using VLANs and OpenFlow

Miscellaneous

• OpenFlow Terms - A glossary of terms that show up in the docs
• Frisbee - Dealing with Frisbee's multicast traffic