wiki:Internal/VirtualPL/UML

Version 2 (modified by Gautam D. Bhanage, 15 years ago) ( diff )

—

Using UML for ORBIT Node virtualization

The goal of this web page is to provide a brief overview as to how the ORBIT setup could be used to evaluate performance of the grid under virtualization with UML.

Outline

  1. Load the concerned ORBIT nodes with the image "uml_orbit.ndz" using the

omf load command.

  1. Once the image is loaded, create the desired tun/tap devices using the command

tunctl

  1. Setup appropriate IP addresses for the tap interface.
  1. Ensure IP forwarding is enabled on the host. This can be done by:

"host# echo 1> /proc/sys/net/ipv4/ip_forward"

  1. Also set proxy_arp by:

"host#ech0 1 > /proc/sys/net/ipv4/conf/tap0/proxy_arp"

  1. Make appropriate changes to the kernel routing table to ensure

packets can be sent to and from the interface.

  1. Start the UML instance
Note: See TracWiki for help on using the wiki.