Changes between Initial Version and Version 1 of Internal/WiMAX/WiMAXAPI/fBSFBDpApi


Ignore:
Timestamp:
Feb 16, 2010, 3:46:16 PM (14 years ago)
Author:
seskar
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • Internal/WiMAX/WiMAXAPI/fBSFBDpApi

    v1 v1  
     1= BSFB – Datapath API  (Internal) =
     2These API describes the functionality exported by the modified NEC basestation controller, which will be used by the Datapath controller module. 
     3== Network Entry Control API Specification ==
     4This API is called by the datapath manager after it receives appropriate notification from the RM-Datapath API
     5=== appendMACAcl (MS_MAC_Addr, IPaddress/mask) ===
     6-       Add  the given MAC address to the ACL (access control list) at the BTS
     7             -  IP address for the corresponding MAC address is specified along with the mask.
     8        -       Done before a connection / flow can be setup.
     9=== removeMACAcl( MS_MAC_Addr, IPaddress/mask) ===
     10-       Remove  the given MAC address from the ACL of the BTS
     11-       IP address for the corresponding MAC address is specified along with the mask.
     12-       Done before a connection / flow can be setup.
     13=== acceptMAC(MS_MAC_Addr) ===
     14=== rejectMAC(MS_MAC_Addr) ===
     15=== newClientRegistration(MS_MAC_Addr) ===
     16=== clientDeregistration(MS_MAC_Addr) ===
     17
     18 
     19== Radio Level Monitoring ==
     20=== getAvailableResources () ===
     21-       Returns the Available DL and UL resources in the BS currently.
     22=== getMCS(MSID) ===
     23-       Returns the current Modulation and coding scheme for the given MAC address.
     24=== getThroughput(MSID) ===
     25-       Returns the current MAC throughput (Mbps) for the given MAC addess.
     26
     27=== getPacketLoss(MSID) ===
     28-       Returns the current packet loss rate and retries for the given service flow.