Changes between Version 1 and Version 2 of Tutorials/k0SDR/Tutorial14

Timestamp:

Sep 8, 2015, 6:17:02 PM (9 years ago)

Author:

prasanthi

Comment:

—

Tutorials/k0SDR/Tutorial14

@@ -1 @@
-== Spectrum sensing with USRP2 and wiserd ==
+== Zybq-based WISER platform startup ==
 
 [[TOC(Tutorials/k0SDR*)]]
 
 === Description ===
-This tutorial will utilize Wiserd to set up USRPs for signal transmission and reception. 
+This tutorial shows how to setup the Zynq-based WISER platform (Zedboard + ADFMCOMMS1) on ORBIT.
 
 === Hardware / Software Resources utilized ===
- 1. Grid nodes with a USRP2 connect via Ethernet.
- 2. ''ubuntu-14-04-64bit-sdr.ndz'': disk image loaded onto nodes.
- 3. [http://wiser.orbit-lab.org/wiki/wiser/mSoftware/aWiserd Wiserd] - interface to configure and stream data to/from USRPs.
- 4. octave - generate transmit data file and plot received data file.
+ 1. An SB6 nodes with WISER platform connected.
+ 2. ''wiser_sb6_zedboard.ndz'': disk image loaded onto nodes.
 
 
 === Set up ===
- * To get started first make a reservation on the [https://www.orbit-lab.org/schedule/ Orbit Scheduler] for using the Grid.
+ * To get started first make a reservation on the [https://www.orbit-lab.org/schedule/ Orbit Scheduler] for using the SB6.
 
- * After logging into grid console, make sure all nodes are turned off
+ * After logging into SB6 console, make sure all nodes are turned off
 {{{
 nilanjan@console.grid:~$ omf tell -a offh -t system:topo:all