| Version 5 (modified by , 17 years ago) ( diff ) |
|---|
Orbit Noise Generator Baseband Board (BiBo)
Table of Contents
BiBo performs baseband I/Q data acquistion and generation, data processing and transmission to upstream data servers through a USB interface.
Hardware Components
- Cypress EZ-USB FX2 - CY7C68013 USB microcontroller, which is an 8051 core with a USB2 interface
- Xilinx XC3S400-4TQ144C FPGA
First you must upload the firmware onto the FX2. Once the firmware is ready on the FX2. Once the FX2 is programmed, it programs the FPGA by feeding it a sequence of bits or bytes that configure all the gates and datapaths and doohickeys inside.
PCB
Programming Notes
Appendix
Attachments (5)
-
BaBo-13-Global-Schematic.pdf
(34.1 KB
) - added by 17 years ago.
Top BaBo Schematic
-
BaBo-13-FPGA-Schematic.pdf
(32.0 KB
) - added by 17 years ago.
FPGA Schematic
-
BaBo-13-DAC-Schematic.pdf
(44.9 KB
) - added by 17 years ago.
DAAD Schematic
-
BaBo-13-USB-Schematic.pdf
(32.5 KB
) - added by 17 years ago.
Cypress USB Schematic
-
BaBo-13-POWER-Schematic.pdf
(22.5 KB
) - added by 17 years ago.
Power Supplies Schematic
Download all attachments as: .zip
Note:
See TracWiki
for help on using the wiki.
